Water Well Drilling Rigs, Truck Mounted Waterwell Drilling Rigs, Tractor Mounted Waterwelll Drilling Rigs
 
 
PRODUCTS
Drilling Rigs
Water Well
Piling
Mining
Core
Tools & Accesories
DTH Hammers
Button Bits
Rock Roller Bits
Cluster Hammer
Udex System
Hole Openers (API Certified)
Drill Rods/Casing/UPVC Pipes
Friction Welded Drill Rods
UPVC Pipes
Drill Rods (API Certified)
Hand Pumps
India Mark II
India Mark III
Afridev
Extra Deep Well
Air Commpressor
Mobile Water Treatment Unit
Water Purifier

  Water Well Drilling Rigs

  Truck Mounted Drilling Rigs
 
DTH
DTH cum Rotary Combination
  Tractor Mounted Drilling Rigs
  Trailer Mounted Drilling Rigs
   
 
DTH drilling rig
DTHR Drills
Tractor Mounted Drill
Trailer Mounted Drills
   
  DTHR / ROTARY DRILL RIG
Brief Technical Specification
 
 
DESCRIPTION MODELS
DTHR 300 DTHR450 DTHR 600
Drilling Capacity: Drill hole size Max. Remaining Size (in steps) Max. Depth Drill rod size 10.0” (254mm) 14.0” (335mm) 984 ft (300 mtrs) 4.5” (114 mm) 10.0” (254mm) 14.0” (335mm) 1475 (450 mtrs) 4.5” (114 mm) 10.0” (254mm) 16.0” (406mm) 1965 ft (600 mtrs) 4.5” (114 mm)
(Under Favourable Drilling Condition)
Mast: Construction Centraliser opening R.H Travel Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs) Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs) Sturdy Box Type 18.0” (457mm) 23 ft (7 mtrs)
Rotary Head: Max. Speed Max. Torque 0 to 120 rpm 434 Kgf 0 to 120 rpm 475 Kgf 0 to 120 rpm 519 Kgf
Feed System: Pull Up Force (Max.) Pull Down Force (Max.) Rapid speed (up) 11285 Kgf 5525 Kgf 40 m/min 16085 Kgf 8480 Kgf 30 m/min 21990 Kgf 11215 Kgf 24 m/min
Hydraulic System: Max. Operating Pressure Filtration (Nom) Return Tank Capacity 220 bar 10 microns 750 ltrs 240 bar 10 microns 800 ltrs 210 bar 10 microns 800 ltrs
Prime Mover: Input Drive Driven by suitable Diesel engine Driven by suitable Diesel engine Driven by suitable Diesel engine
Levelling Jacks: Cylinder Stroke 4 No.s Ø 125mm X 610mm 4 No.s Ø 125mm X 610mm 4 No.s Ø 125mm X 610mm
(System Consists of Reverse Flow Resricted Valves)
Break Out Wrench: Actuation Type Cylinder Stroke Hydraulic 300 mm Hydraulic 300 mm Hydraulic 300 mm
Mud Pump: Bore Stroke Max. Flow Max. Pressure Drive 152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic 152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic 152 mm 200 mm 1361 LPM 20.75 Kg/cm² Hydraulic
Options: Oil Cooler Type Water Injection Pump Flow Max. Presssure Type of Drive Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 55 Lpm 42 Kg/Cm² Hycraulic
 
  • Compressor/Rod changer/Hoist/Water pump with drive are offered as the per the requirement of the customer technical specifications
  • Getech Industries Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly

(In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

  DTH DRILL RIGS
Technical Specifications
 
 
Description Models
DTH 1000 DTH 1500 DTH2000
Drilling Capacity: Drill hole size Max. Depth Drill Rod Size 6.0” – 8.0” (152mm – 203mm) 1000ft (305mtrs) 4.5” (114mm) 6.5” – 8.0” (168mm – 203mm) 1500ft (457mtrs) 4.5” (114mm) 6.0” – 10.0” (152mm – 254mm) 2000ft (610mtrs) 4.5” (114mm)
(Under favourable drilling conditions)
Mast: Construction Centraliser opening Rod/Casing handling Sturdy channel 270 mm 6.0 mtrs. Sturdy channel 270 mm 6.0 mtrs. Sturdy channel 305 mm 6.0 mtrs.
Rotary Head: Max. Speed Max. Torque 0 to 100 rpm 245 kgf 0 to 100 rpm 245 kgf 0 to 100 rpm 490 kgf
Feed System: Pull up Force Pull down Force Pull up speed 8590 kgf 5890 kgf 42 m/min 14070 kgf 7420 kgf 30 m/min 20940 kgf 10680 kgf 20 m/min
Hydraulic System: Pump Reservoir capacity Operating Pressure Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi) Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi) Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi)
Levelling Jacks: Quantity Bore X Stroke Length 4 Nos. 100mm X 610mm 4 Nos. 125mm X 610mm-2 100mm X 610mm-2 4 Nos. 125mm X 610mm
Air Line Lubricator: Type Max. Pressure Venture Type 450 psi Venture Type 450 psi Venture Type 450 psi
Options: a) Rod Changer b) Oil cooler Type c) Welding Generator d) Water Injection pump Flow Max. Pressure Manual operated Rod changer Hydraulic Driven Fin type oil to air Hydraulic Driven 36 LPM 425 psi Manual operated Rod Changer & Jib Hoist Hydraulic Driven Fin type oil to air Hydraulic Driven 55 LPM 600 psi
   
  Getech DTHR 600 DTH Cum ROTARY DRILL RIG DTHR – 600
 
  Technical Specifications
 
  • DTH Drilling To Hole Diameter: 203 mm (8”inches) and Maximum depth: 600 meters, Rotary Drilling to Hole Diameter: 311 mm (12¼”), Maximum Remaining Diameter: 407 mm (16”) and Maximum Depth: 600 meters. 6 X 4 Carrier Truck Minimum. Load capacity of 25 Tonnes
  • Prime Mover engine capacity: 260HP @ 2200 RPM
  • Mast Overall Length: 9000mm
  • Feed System has Pull Back: 22500Kgf and Pull Down: 11000Kgf
  • Rotary Head Assembly torque upto 600 Kg-m
  • Stabilizer Cylinder bore Dia of 125mm Break out Winch has Cylinder bore Dia: 80mm and Stroke: 300mm.
  • Mud Pump Max Flow of 1685 Liter/min
  • Air Compressor to 1350 Cfm/350 PSI
   
  MINI CRAWLER MOUNTED HYDRAULIC RIGS
 
  GETECH Hydraulically operated multi purpose Mini crawler Mounted Rigs are specially designed for fast & cost effective drilling by air, mud or foam drilling methods using down-the-hole hammers & bits, core barred and tools, rotary tricone bits and other conventional tools as per customer’s choice, Hydraulic system powered by Deck engine is operated by fixed displacement pump with proportional valve, which regulates track motors, rotary head speed, feed etc., Centralized control panel located close to the drilling point ensures convenience of operation, Getech Rigs require minimum maintenance and easy to operate.
   
  Technical Data
 
Description Core Drilling Application
KMC - 10
DTH Drilling Application
KMC - 10
Capacity: Drill hole Dia.(CORE/DTH) Drill Depth Over Burden Drill Dia. Over Burden Drill Depth NW / NQ 500 Feet. ----- ----- Under Favorabnle drilling conditions 4.5” 500 Feet. 6.5” 150 Feet. Under Favorabnle drilling conditions
Hydraulic System:
A)Prime Mover
B) Feed Pull up Force. Pull Down Force. Pull Down Speed. Pull up Speed
C) Rotation Speed Torque Speed. Torque.
Deck Engine 942 HP @ 1500 rpm) 4700 Kgf. 2400 Kgf. 30 m/min. 24 m/min. 0-80 rpm (Low mode) 203 Kgf-m and 0-410 rpm (High mode) 41 Kgf-m Deck Engine 942 HP @ 1500 rpm) 4700 Kgf. 2400 Kgf. 30 m/min. 24 m/min. 0-80 rpm (Low mode) 203 Kgf-m ------------ ------------
Compressor
Minimum Suggested
---------------------------- 540 CFM & 185 PSI
Under Carriage Maximum Speed 2 kmph Grouser Type Single/Triple Wheel Base 1650 mm Grouser width 254/310 mm Ground pressure 0.78 kgf/sq.cm Type of Drive Independent Hydraulic Motor For each Track No. of Rollers. 5 on each track Maximum Speed 2 kmph Grouser Type Single/Triple Wheel Base 1650 mm Grouser width 254/310 mm Ground pressure 0.78 kgf/sq.cm Type of Drive Independent Hydraulic Motor For each Track No. of Rollers. 5 on each track
Water Pump
Capacity Suggested min Drive & Mounting
50 LPM @ 35 Kgf/cm² 36 LPM @ 28 Kgf/cm² Hydraulic
Hoist: 1 Ton @ 30 meters / minute -----------------------
   
 

GETECH Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly.

(In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

   
  Getech – 1000 SP Drilling Rig
 
 
  • Maximum Drill hole Diameter – 20” and
  • Maximum depth – 10 ft. And 6” – 12” upto a depth of 1000ft
  • Mast Length – 8800 mm
  • Rotary head speed 0 – 65 R.Pm. Rotary head Torque 0 – 900 Kg-m
  • Feed system pull up – 11,200 Kgs
  • Feed system pull down – 5500 Kgs
  • Engine – 260 HP @ 2200 R.Pm
  • Fitted with mobile Crane
  • Fitted with 1150/300 IR. Compressor

 

 
 
CONTACT DETAILS
Plot No. 194/3&4, Phase II Cherlapally Industrial Area HCL Post, Hyderabad 500051
AndhraPradesh, INDIA
Send Mail
Key Personnel
Ms Geetha V Nair
Chief Excutive Officer
Mobile:+91-9391669448,9441031720
Phone:++91-40-27261332
Fax:+91-40-27261331
   
Terms & Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved.