Blue UPVC Pipes Manufacturers, Blue UPVC Pipes Exporters, Blue UPVC Pipes Suppliers
 
 
PRODUCTS
Drilling Rigs
Water Well
Piling
Mining
Core
Tools & Accesories
DTH Hammers
Button Bits
Rock Roller Bits
Cluster Hammer
Udex System
Hole Openers (API Certified)
Drill Rods/Casing/UPVC Pipes
Friction Welded Drill Rods
UPVC Pipes
Drill Rods (API Certified)
Hand Pumps
India Mark II
India Mark III
Afridev
Extra Deep Well
Air Commpressor
Mobile Water Treatment Unit
Water Purifier

 
UPVC Pipes
  UPVC Pipes Application for Blue Casing
  UPVC Pipes Application for Agriculture
  Water Storage Tanks
  Solvent Cement
  HDPE Pipes
  Ring fit Pipes
  Suction & Garden Pipes

We are trading from the leading mfgs in India & Abroad, casing pipes using latest technology for Bore/ Bore-wells.

  • CM type: 40 mm to 250 mm with normal measurements
  • CS type: 150 mm to 250 mm with normal measurements
  • CM (middle type well): Suitable pipes for wells of depth 150 mtr to 250 mtr
  • CS (small type well): Suitable pipes for 80 mtr depth wells
Specifications &Benefits
  • Better quality, similar wall thickness and well-built
  • Compressive energy with adequate pressure
  • Light weight for easy transportation & to set
  • Water drawing easier as bore works uninterrupted
Specifications
  • Precise Gravity: 1.40 g/cm3 - 1.45 cm3
  • Wicket Softening Temperature: 76 degree centigrade
  • Tensile Energy: 50 + or - N/mm2
  • Effective Energy: IS - 12818 applicable
  • Productive Energy: 55 N/cm2
Guidelines to Connect
  • Put down carefully casings and ribbed screens into bore-wells
  • Select gravel packing after checking soil status as plot quantity for screens depends on it
  • Ensure no empty space while gravel packing the pipe
  • Avoid high pressure and pressure in opposite direction while drawing water
Process to Joint
  • Male thread and female thread are fixed either side of our casing, ribbed and screen pipes
  • Joints have better tensile power than others to carry more assembly weights to deeper levels
  • Load decreases on threaded joints when total assembly weight rests under water
Quality Control

Technology equipment of international standards to ensure better quality of pipes through tests. With its experienced and well trained staff the company is manufacturing the best quality and incomparable products of high capacity. We comply with ISI norms and specifications to test the products.

Water Storage Tanks Quality Generations

Install UPVC Pipes water storage Tanks it ensures Clean & pure water supply throughout the day and in all seasons water storage tanks are manufactured adopting latest technology and in double layer, to provide extra strength and uniform wall thickness. These are made from FOOD GRADE MATERIAL 100%. Water Storage Tanks - Main Features
  • Made with High quality material to make it more durable and strong
  • Are available in attractive designs & colors
  • Our master batches also have the U.V. Stabilizer component in it
  • Keep water hygienically clean, avoid fungus & bacteria
  • Are easy to carry, install and they occupy very less space
  • Are leak proof, rust proof and maintenance free
  • No need of painting or water proofing
  • Are cost effective, economical compared to the products of other and conventional tanks constructed with bricks and RCC
  • Are available in the form of cylindrical, vertical and loft tanks
  • Are available in sizes ranging from 200 to 5000 ltrs. (Cylindrical, vertical) from 150 to 1000 ltrs. (Loft tanks)

Rectangular loft tanks
Dimension in mm

Code No. Normal Capacity In Lts. Length Width Height Hand Hole
SWC 15-02 150 750 720 320 230
SWC 20-02 200 950 720 320 230
SWC 30-02 300 1090 900 320 230
SWC 40-02 400 1190 940 430 230
SWC 50-02 500 1290 1100 430 230

Cylindrical Vertical Tanks
Dimension in mm

Code No. Normal Capacity In Lts. Dia Height Man Hole
SWC 20-01 200 660 630 280
SWC 30-01 300 710 815 280
SWC 50-01 500 880 920 400
SWC 75-01 750 980 1060 400
SWC 100-01 1000 1010 1270 400
SWC 150-01 1500 1260 1320 400
SWC 200-01 2000 1310 1540 400
SWC 300-01 3000 1550 1650 500
SWC 500-01 5000 1900 2100 500

Solvent Cement

The Solvent cement is used for jointing PVC pipes & Fittings. Proper care is always taken to ensure stringent quality checks on the product at all stages, without compromising on the quality. This is simple process for jointing RIGID PVC PIPES with moulded or fabricated Fittings. The tools required are a hacksaw with fine teeth, sandpaper, cotton waste, a soft brush, a knife and solvent cement. The jointing procedure is as under:
  • Inspect the pipe and fittings to ensure that they match perfectly
  • Cut the pipe square, using the hacksaw, clear burrs with knife and cotton waste
  • Rub with the Sandpaper outside of pipe and inside of fittings. Clean again with cotton waste
  • Apply solvent cement evenly with a soft brush on the outside of the pipe, to a width slightly more than the corresponding depth, as also on the inside of the fitting
  • Insert the pipe in fitting and turn it through 90ºC, to ensure uniform distribution of cement
  • Hold the joint for 2 minutes and ensure that the pipe does not slip out of fitting
  • Wipe out the excess cement from entire surface of the joint
  • The joint should be allowed to set, undisturbed. It should be pressure tested only after 24 hours.

Applications

  • It well be useful for jointing of PVC pipes and fittings
  • It can be used for jointing any of two of the products made from PVC material

Available sizes

25 lm, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml, 5000 ml

Sizes of Solvenet Box Packing Will be as under

25 ml - 576 nos 50 ml - 288 nos 100 ml - 144 nos 250 ml - 48 nos 500 ml - 12 nos 1000 ml - 6 nos 500 ml - 4 nos

Safety Precautions

  • Avoid contact with skin
  • Always replace lids tightly after use
  • Store in a cool place away from direct sunlight
  • Do not breathe Solvent Cement vapours
  • Shake the solvent cement container thoroughly before use
  • Do not smoke while working with solvent cement, as it is highly inflammable
  • The excess solvent should b e wiped out from entire surface of the joint

Solvent Cement

Pipe

Dia

Approx. no. of

Joints / ltrs

Pipe

Dia

Approx. no. of

Joints / ltrs
20 330 140 36
25 280 160 27
32 245 180 25
40 190 200 15
50 140 225 12
63 125 250 9
75 105 280 7
90 80 315 5
110 55 400 2

 

CM Casing Pipes - Table - In All Dimensions & MM

General Dimensions

  Min Max Min Max
40 47.9 48.2 3.5 4.0
50 60.0 60.2 4.0 4.6
80 87.9 88.3 4.0 4.6
100 113.0 113.3 5.0 5.7
125 140.0 140.4 6.5 7.3
150 165.0 165.4 7.5 8.5
175 200.0 200.5 8.8 9.8
200 225.0 225.5 10.0 11.2
250 280.0 280.5 12.5 14.0
 

HDPE Pipes

Salient Features of HDPE Pipes

  • Manufactured as per IS 4984:1995 standards
  • Pipes manufactured either in long coils or 6 meter length depending on pipe dimensions and customer requirement

Physical and Chemical Properties of HDPE Pipes

  • More Flexible
  • Light in Weight
  • Corrosion Resistant
  • Chemically inert
  • Economical
  • Smooth inner and outer finishing resulting in low flow resistance and low power consumption
  • Availability of pipes in long coils reduces much of the cost of laying, jointing and additional couplers
  • Leak proof, strong and easy jointing (Butt jointing)
  • Temperature resistant from 40°C to 80°C
  • Very good insulation properties
  • Excellent UV resistance

Applications of HDPE Pipes

  • For Agriculture & Drinking water lines
  • As delivery pipes for single phase & 3 phase submersible pumps
  • As suction and delivery pipes for jet pumps
  • As suction and delivery for centrifugal & monoblock pumps
  • As delivery pipe for open well submersible pumps
  • Telecom & electrical ducting
  • Slurry disposal
  • Industrial flow applications
  • Sewage pipe systems

What GETECH Offers you

  • Best quality pipes at most reasonable prices
  • Pipes that meet your needs (Special customer requirements are accepted)
  • Standard pipe coil lengths of various sizes as under:
Pipe Size Available Coil Length
20 - 25 mm 1000 mtrs
30 - 40 mm 600 mtrs
50 mm 400 mtrs
63 - 75 mm 300 mtrs
90 - 110 mm 50 mtrs
125 mm & above 12 & mtrs (single length)
  • Our job goes beyond just selling pipes, as we are committed to the complete customer service
  • We take up pipeline projects on TURNKEY basis
  • We offer HDPE pipe solutions in place of conventional pipes (PVC, GI, Concrete etc.) at competitive price and guaranteed service
  • We provide water lines for agricultural needs with free butt jointing and testing
  • We extend service free of cost any future leakages / defects in the pipe line caused by faculty manufacturing or faulty jointing for a period of 20 years
  • We offer poclain facility (for earth work) to the farmers who buy min. 100 lengths (6 mtrs length), at concessional rates

Dimensional details for HDPE Pipes Made as per IS :4984 - 1995

Wall thickness of pipes for material grade PE 63

Norminal Dia PN - 2.5 PN - 4 PN - 6 PN - 8 PN - 10 PN - 12.5 PN - 16
DN MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX
20 - - - - - - - - 1.9 2.3 2.3 2.8 2.8 3.3
25 - - - - - - - - 2.3 2.8 2.8 3.3 3.5 4.1
32 - - - - 1.9 2.3 2.4 2.9 3.0 3.5 3.6 4.2 4.5 5.2
40 - - - - 2.3 2.8 3.0 3.5 3.7 4.3 4.5 5.2 5.6 6.4
50 - - 2.3 2.8 2.9 3.4 3.8 4.4 4.6 5.3 5.6 6.4 6.9 7.8
63 - - 2.5 3.0 3.6 4.2 4.7 5.4 5.8 6.6 7.0 7.9 8.7 9.8
75 - - 2.9 3.4 4.3 5.0 5.6 6.4 6.9 7.8 8.4 9.5 10. 11.7
90 2.3 2.8 3.5 4.1 5.1 5.9 6.7 7.6 8.2 9.3 10.0 11.5 12.5 14.0
110 2.7 3.2 4.3 5.0 6.3 7.2 8.2 9.3 10.0 11.2 12.3 13.8 15.2 17.0
125 3.1 3.7 4.9 5.6 7.1 8.1 9.3 10.5 11.4 12.8 13.9 15.5 17.3 19.3
140 3.5 4.1 5.4 6.2 8.0 9.0 10.4 11.7 12.8 14.3 15.6 17.7 19.4 21.6
160 4.0 4.6 6.2 7.1 9.1 10.3 11.9 13.3 14.6 16.3 17.8 19.8 22.1 24.6
180 4.4 5.1 7.0 7.9 10.2 11.5 13.4 15.0 16.4 18.3 20.0 22.2 24.9 27.6
200 4.9 5.6 7.7 8.7 11.4 12.8 14.9 16.6 18.2 20.3 22.3 24.8 27.6 30.6
225 5.5 6.3 8.1 9.8 12.8 14.3 16.7 18.6 20.5 22.8 25.0 27.7 31.1 34.5
250 6.1 7.0 9.7 10.9 14.2 15.9 18.6 20.7 22.8 25.3 27.8 30.8 34.5 38.2
280 6.9 7.8 10.8 12.1 15.9 17.7 20.8 23.1 25.5 28.3 31.2 34.6 38.7 42.8
315 7.7 8.7 12.2 13.7 17.9 19.9 23.4 26.0 28.7 31.8 35.0 38.7 43.5 48.1
355 8.7 9.8 13.7 15.3 20.1 22.4 26.3 29.2 32.3 35.8 39.5 43.7 49.0 54.1
400 9.8 11.5 15.4 18.0 22.7 26.4 29.7 34.4 36.4 42.1 45.5 51.4 55.2 63.7
450 11.0 12.9 17.4 20.3 25.5 29.6 33.4 38.7 41.0 47.4 50.0 57.5 - -
500 12.2 14.3 19.3 22.4 28.4 32.9 37.1 42.9 45.5 52.6 55.6 64.2 - -

Dimensional details for HDE pipes made as per IS: 4984 - 1995

Wall thickness of Pipes for material grade PE 80

Norminal Dia PN - 2.5 PN - 4 PN - 6 PN - 8 PN - 10 PN - 12.5 PN - 16
DN MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX
20 - - - - - - - - 1.9 2.3 2.3 2.8 2.8 3.3
25 - - - - - - - - 2.3 2.8 2.8 3.3 3.5 4.1
32 - - - - 1.9 2.3 2.4 2.9 3.0 3.5 3.6 4.2 4.5 5.2
40 - - - - 2.3 2.8 3.0 3.5 3.7 4.3 4.5 5.2 5.6 6.4
50 - - 2.3 2.8 2.9 3.4 3.8 4.4 4.6 5.3 5.6 6.4 6.9 7.8
63 - - 2.5 3.0 3.6 4.2 4.7 5.4 5.8 6.6 7.0 7.9 8.7 9.8
75 - - 2.9 3.4 4.3 5.0 5.6 6.4 6.9 7.8 8.4 9.5 10. 11.7
90 2.3 2.8 3.5 4.1 5.1 5.9 6.7 7.6 8.2 9.3 10.0 11.5 12.5 14.0
110 2.7 3.2 4.3 5.0 6.3 7.2 8.2 9.3 10.0 11.2 12.3 13.8 15.2 17.0
125 3.1 3.7 4.9 5.6 7.1 8.1 9.3 10.5 11.4 12.8 13.9 15.5 17.3 19.3
140 3.5 4.1 5.4 6.2 8.0 9.0 10.4 11.7 12.8 14.3 15.6 17.7 19.4 21.6
160 4.0 4.6 6.2 7.1 9.1 10.3 11.9 13.3 14.6 16.3 17.8 19.8 22.1 24.6
180 4.4 5.1 7.0 7.9 10.2 11.5 13.4 15.0 16.4 18.3 20.0 22.2 24.9 27.6
200 4.9 5.6 7.7 8.7 11.4 12.8 14.9 16.6 18.2 20.3 22.3 24.8 27.6 30.6
225 5.5 6.3 8.1 9.8 12.8 14.3 16.7 18.6 20.5 22.8 25.0 27.7 31.1 34.5
250 6.1 7.0 9.7 10.9 14.2 15.9 18.6 20.7 22.8 25.3 27.8 30.8 34.5 38.2
280 6.9 7.8 10.8 12.1 15.9 17.7 20.8 23.1 25.5 28.3 31.2 34.6 38.7 42.8
315 7.7 8.7 12.2 13.7 17.9 19.9 23.4 26.0 28.7 31.8 35.0 38.7 43.5 48.1
355 8.7 9.8 13.7 15.3 20.1 22.4 26.3 29.2 32.3 35.8 39.5 43.7 49.0 54.1
400 9.8 11.5 15.4 18.0 22.7 26.4 29.7 34.4 36.4 42.1 45.5 51.4 55.2 63.7
450 11.0 12.9 17.4 20.3 25.5 29.6 33.4 38.7 41.0 47.4 50.0 57.5 - -
500 12.2 14.3 19.3 22.4 28.4 32.9 37.1 42.9 45.5 52.6 55.6 64.2 - -

Ring fit Pipes

A Dynamic New Product

  • Integrated Thermoplastic Ltd., a unit of UPVC Group of Companies has developed Ring fit pipes to overcome problems commonly experienced in solvent cement jointing of higher diameter (above e 160 mm) uPVC Pipes
  • These UPVC Gold branded Ring fit pipes offers excellent advantages over other uPVC pipes specially for underground applications

The Ringfit pipe convenience and advantages

  • Pipelines utilizing Ring fit pipes can be taken up for pressure testing immediately on completion of the section. Unlike for solvent cement joints, the waiting period required for solvent cement jointing is entirely eliminated, resulting in short installation duration
  • Ring fit pipes are easy to install in the field, Ring fit pipes of diameters below 140 mm can be jointed by hand pressure. For large sizes a pipe jack is available for the purpose

The Ring fit flexibility

  • Pipe lines made with Ring fit pipes automatically accommodate liner expansion and contraction thus eliminating the need for expansion loops as are required for solvent cemented pipelines
  • Slight shifting of soil or bending of the pipeline upto 2 degrees per joint can be easily accomodated by Ring fit pipes

The unique Elastomeric Sealing Ring

  • Ring fit pipes are fitted with a special elastomeric sealing ring with has many advantages over natural rubber
  • It is not affected by ozone, ultraviolet radiation (sunlight), bacteria, fungus and termites
  • It is resistant to salt water, organic vegetable oils, dilute acids, dilute alkalies, aqueous chlorine and other pollutants and contaminants found in communal sewage and waste water
  • It has prolonged self-life and Manufacturers claim a shelf life over 50 years
  • Highly reliable and robust. Tests have shown that Ring fit joints successfully withstand pressures beyond the specified testing pressures for the pipe.

Precautions to be taken

  • While jointing higher diameter pipes with solvent cement, the cement applied sometimes tends to dry before the joint can be completed, resulting in imperfect joints leading to leakage when used. This situation could be avoided by applying correct quantity of solvent cement and quick jointing of pipes and too little solvent cement will lead to weak or leaky joints, and too much will result in accumulation of cement inside the pipe which eventually weaken the area adjoining the joints
  • Solvent cement is inflammable and calls for extra care in handling. Its life deteriorates if it is exposed to the sun and after longer periods of its storage

CS Casing Pipes - Table - In All Dimensions & MM

General Dimensions

  Min Max Min Max
150 165.0 165.4 5.7 6.5
175 200.0 200.5 7.0 7.8
200 225.0 225.5 7.6 8.8
250 280.0 280.5 9.6 11.0

DN Inches
163mm 61/2
213mm 81/2

Suction & Garden Pipes

uPVC Plasticizers and Pipe Industries, Nandyal, has been promoted by the well known Getech Group of Companies. The company has gained high reputation in the field of the manufacture of PVC HOSES & DRIP IRRIGATION system in a remarkably short span of time, the credit of which goes to the chairman of the Group Sri S.P.Y.Reddy, a great visionary technocrat and pioneer in the PVC industry.

uPVC Plasticizers and Pipe Industries has an infrastructure and operating systems which mach the highest standards practiced in the industry. The manufacturing activities are well taken care of by a team of highly competent professionals. The rich knowledge base and the vast experience of our team members backed by our time tested technology give us the right platform we require to provide the sort of smooth and flawless service we claim to provide. Our standardized operating systems provide quality services adequate to the products manufactured by the company.

PVC Heavy Duty Suction House - Applications

  • Construction and other industries.
  • Suction of water, agriculture and others.
  • Suction of saline water, light acids, sewage, alkaline and other chemicals excepting industry.
  • Suction of dug chart.
  • Civil engineering and sub way mining constructions.
  • Fish and shipping industry.
  • Conveying of granules of fine particulars of raw material in processing industries.

Features & Specifications

  • Minimum friction & maximum flow is maintained.
  • Good environmental stress crack, corrosion, frost, abrasion crush, kink not and chemical resistance.
  • Excellent pressure & vaccum ratings.
  • Easy and quick installation and safe portable water supply.
  • Product range from 25 mm to 110 mm.

Product Description

Size mm inch Bending Radius in mm Thickness in mm Pressure kg/cm² Brusting kg/cm² kgs Approx Weight in kgs Length in mts
25 3/4 55 2.0 8.0 17.0 6 30
32 1 105 2.5 7.5 15.0 7 30
40 1 1/4 150 2.5 5.5 14.5 11 30
50 1 1/2 165 3.0 5.0 14.0 15 30
63 2 185 3.5 4.5 13.0 22 30
75 2 1/2 225 3.5 4.0 13.5 30 30
90 3 250 4.0 4.0 12.0 40 30
110 4 300 5.0 3.5 10.0 75 300

PVC Petrol & Garden Tubes

The unit also manufactures PVC petrol and garden tubes in the range of 20, 25, 32, 40 and 50 mm. Salient Features of the same are as under:

Applications

  • Electronic products and vehicle parts.
  • Transfer pipe for petrol, diesel and kerosene.
  • Medical equipment piping system.
  • Ice-rink constructions.
  • For gardening.
  • For domestic
  • Any other portable use.

Characteristics

  • Made of super powder of PVC and inner and outer side are made smoother with the soft PVC compound.
  • It is flexible and durable enough against tube and cover pressure.
  • Available in various colours.

Product Description

Size Bundel wt/kg Length mtm

1/2

3/4

1

1 1/4

1 1/2

3

5.5

7.5

11.0

15.0

30

30

30

30

30

Drip Irrigation

Dripper: ISI CM/L: 6390170, Pipe: CM/L: 6376883

FOR MORE QUALITY & MORE YIELDS USE GE-TECH DRIP IRRIGATION SYSTEM

UPVC Plasticizers and Pipes Industries, Nandyal, an important unit of the prestigious Getech Group of companies manufactures, quality oriented – long lasting Drip Irrigation Systems to suit your needs and they are now before you.

Use:

  • When your land is not leveled.
  • When the land does not have sufficient water source and supply.
  • To avoid wastage of water in irrigation.
  • When you are not able to five uniform irrigation to the field.
  • When you want to supply required nutrients with uniform distribution and reduce / save 25% expenditure in Fertilizer application.
  • Drip for saline and alkaline soils and get excellent yields.
  • Drip in lands of excess weed growth, Reduce weed growth and save labor cost.
  • For all Orchards, Flower Plants, Sugarcane, Maize, Vegetables and Wheat and for all types of plants and trees.
  • Drip and increase pest and disease resistance in the plants.
  • Drip, to bring your excess land under irrigation.
  • Drip, for augmenting productivity upto 30% of normal production.

OUR Production with online

Laterals 16 mm
12 mm
Drippers 4 Lph
8 Lph

Our Production with inline

Inline Laterals 16 mm – 60 cm 4 Lph
16 mm – 40 cm 4 Lph
12 mm – 40 cm 4 Lph

 

 
 
CONTACT DETAILS
Plot No. 194/3&4, Phase II Cherlapally Industrial Area HCL Post, Hyderabad 500051
AndhraPradesh, INDIA
Send Mail
Key Personnel
Ms Geetha V Nair
Chief Excutive Officer
Mobile:+91-9391669448,9441031720
Phone:++91-40-27261332
Fax:+91-40-27261331
   
Terms & Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved.